Look for loose coating, cracks, lifted edges, standing water, damaged fencing and debris near drains. Remove loose leaves and grit with a soft broom before rinsing so debris is not pushed across the finish.
Inspect the court and surrounding area
Look for loose coating, cracks, lifted edges, standing water, damaged fencing and debris near drains. Remove loose leaves and grit with a soft broom before rinsing so debris is not pushed across the finish.
Use a cautious cleaning approach
Check the court builder’s or coating manufacturer’s care guidance. Test a small inconspicuous area, use only approved cleaners and start with a gentle rinse. A concentrated high-pressure jet can scar coatings, loosen paint or force water into cracks.
Protect drainage and playability
Keep runoff from carrying debris into drains, and follow local requirements for any cleaning products. Let the court dry fully before use. If the surface is peeling, soft, uneven or holding water, cleaning alone will not correct the underlying issue.
Utah seasonal note
After snow and freeze-thaw periods, inspect for cracks, drainage problems and coating changes before opening the court for regular use. Schedule repairs or resurfacing based on the system’s instructions rather than covering defects with a stronger wash.
Common questions
Can I use a pressure washer on a sport court?
Only if the court manufacturer allows it and the pressure, tip and technique are appropriate. A gentle hose rinse is a lower-risk starting point; test first and stop if the finish changes.
Does washing fix cracks or faded court lines?
No. Cleaning removes surface soil but cannot repair cracks, restore failed coating or repaint lines. Those conditions need a separate assessment.